12V/24V Micro Brushless DC Circulation Pump DC40B

12V/24V Micro DC Brushless Magnetic Drive Water Pump Low noise Absolutely safe completely waterproof For fountain computer cooling system 

 

 

 

 

This is a high-quality made DC Brushless Magnetic Drive Water Pump

 

Built by a brushless motor so that quieter and last longer than a non-brushless pump, plus, it will not generate electric spark like the non-brushless pump does, so it's safer, can be used to pump oil (inflammable fluid)
Super long working lifespan (more than 30,000 hours), maintenance-free
Small size, low consumption, low noise(less than 35db)
Submersible and entirely waterproof, easy to install and use
Can be used to pump water, oil, acid and alkali solution
Variety of power supplies: solar panel, DC electric source and battery

 

 

 

 

For Pump, Water plays three roles: 1, the medium being pumped; 2, coolant of pump;3, lubricant of pump.

 

 

 

 

 

Features:

Brushless, permanent magnetic rotor, maintenance-free, long life

 

Small size, high efficiency, low consumption, low noise

 

Stator and circuit board sealed by epoxy resin, completely water proof

 

Parameter adjustable, 24V pump’s head can be adjusted from 2m to 5m

 

 

Can be fixed on the vessel wall with sucking disk

 

Can be customized for friends with bulk product demand

 

 

 

  

  

   

 

Specifications:

 

1 Sizes and weight 71.9mmx59.5mmx43mm;250g
2 Dimension of inlet 13.8mm

3 Dimension of outlet 10mm
4 Driving method Brushless, Magnetic , 2 phase or 3 phase
5 Pump material PA66+GF30% (optional)
6 Condition of use Continuously
7 Fluids Water, oil, gasoline, acid and alkali solution etc
8 Max working temp 60℃(2 phase)or 100℃(3 phase)
9 Power consumption 2.5W~15.6W
10 Rated voltage 12Vdc or 24Vdc
11 Voltage used 5Vdc ~ 12Vdc or 5Vdc ~ 24Vdc
12 Max rated current 1A
13 Max flow rate 9L/MIN(2.4G/MIN)
14 Max Static Head 5m(16ft)
15 Noise <35dB
16 Water proof class IP68(can be submersible installed)
17 Life span More than 30000hrs
18 Power supply Solar panel; DC electric source; battery

 

 

 

 

 

 

 

 

 

 

 

 

This product can be used in many fields, such as computer cooling system, Garden fountain, Aquarium, car cooling system, humidifier, air conditioner, and many other cooling and circulation systems.

 

 

 

Parameters (The technical specification only for reference)

 

 

 

  

 

 

  

 

 How to Choose pump:

1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max heightwhen there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump(refer to the above Head-Flow Curve graph).

2. Make sure the dimension(threaded interface or not, the direction and diameter of outlet and inlet).

3. Working environment(temperature and medium).

4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.

 

 

Note:

1. Working at rated voltage. The positive pole is red wire, the negative pole is black wire.

2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation.(if outside water installation, you should make sure it is installed blow the liquid surface)

3. When blocking, long-running is not allowed.

4. Preventing any hard particles entering the pumps.